Description
๐ H11A1 Optocoupler โ Technical Data (DIP-6)
๐น Description
The H11A1 is a phototransistor optocoupler.
It contains an infrared emitting diode (LED) and a silicon NPN phototransistor in a 6-pin DIP package.
It provides electrical isolation between the input and output.
๐น Pin Configuration (DIP-6)
1 โ Anode (LED +)
2 โ Cathode (LED โ)
3 โ No Connection
4 โ Emitter (Transistor โ)
5 โ Collector (Transistor +)
6 โ Base (optional transistor base pin, usually left unconnected)
๐น Absolute Maximum Ratings
-
Forward current (LED): 60 mA max
-
Reverse voltage (LED): 6 V
-
Collector-emitter voltage: 30 V max
-
Collector current: 50 mA max
-
Collector power dissipation: 150 mW max
-
Isolation voltage: 5300 VRMS
๐น Electrical Characteristics (Typical Values)
-
Forward voltage of LED: 1.2V โ 1.5V @ IF = 10 mA
-
Collector-emitter saturation voltage: 0.4V @ IC = 2 mA
-
Current Transfer Ratio (CTR): 50% to 600% (depending on binning)
-
Isolation resistance: >10ยนยน ฮฉ
-
Coupling capacitance: <0.5 pF
-
Switching speed: 2 ยตs to 18 ยตs
๐น Features
-
High dielectric isolation between input and output
-
TTL, CMOS, and logic compatible
-
Low coupling capacitance
-
Wide operating temperature range (โ55ยฐC to +100ยฐC)
-
Base pin available for sensitivity adjustment
๐น Applications
-
Logic signal isolation
-
Microcontroller I/O protection
-
Switch Mode Power Supply (SMPS) feedback
-
Telephone ring detection
-
Relay driver circuits
-
General purpose signal isolation
๐น Typical Application Circuit
Input Side (LED drive):
Output Side (Phototransistor):
-
Base (Pin 6) โ left open
-
When LED is ON โ transistor conducts โ output LOW
-
When LED is OFF โ transistor cuts off โ output HIGH
๐น Internal Structure (Simplified)
-
Left side: Infrared LED
-
Right side: Phototransistor (NPN)
-
Separated by optical gap (no electrical contact, only light coupling)




