{"product_id":"pic18f46k22-i-pt-sop-44","title":"Pic18f46k22-i\/pt Sop 44 On Demand Product","description":"\u003cul\u003e\n\u003cli\u003eC Compiler optimized architecture\/instruction set\u003c\/li\u003e\n\u003cli\u003eData EEPROM to 1024 bytes\u003c\/li\u003e\n\u003cli\u003eLinear program memory addressing to 64 Kbytes\u003c\/li\u003e\n\u003cli\u003eLinear data memory addressing to 4 Kbytes\u003c\/li\u003e\n\u003cli\u003eUp to 16 MIPS operation\u003c\/li\u003e\n\u003cli\u003e16-bit wide instructions, 8-bit wide data path\u003c\/li\u003e\n\u003cli\u003ePriority levels for interrupts\u003c\/li\u003e\n\u003cli\u003e31-level, software accessible hardware stack\u003c\/li\u003e\n\u003cli\u003e8 x 8 Single-Cycle Hardware Multiplier\u003c\/li\u003e\n\u003cli\u003eSleep mode: 100 nA, typical\u003c\/li\u003e\n\u003cli\u003eWatchdog Timer: 500 nA, typical\u003c\/li\u003e\n\u003cli\u003eTimer1 Oscillator: 500 nA @ typical 32 kHz Flexible Oscillator Structure\u003c\/li\u003e\n\u003cli\u003eFactory calibrated to ± 1%\u003c\/li\u003e\n\u003cli\u003eSoftware selectable frequencies range of 31 kHz to 16 MHz\u003c\/li\u003e\n\u003cli\u003e64 MHz performance available using PLL\u003c\/li\u003e\n\u003cli\u003eno external components required\u003c\/li\u003e\n\u003cli\u003eFour Crystal modes up to 64 MHz\u003c\/li\u003e\n\u003cli\u003eTwo external Clock modes up to 64 MHz\u003c\/li\u003e\n\u003cli\u003e4X Phase Lock Loop (PLL)\u003c\/li\u003e\n\u003cli\u003eSecondary oscillator using Timer1 @ 32 kHz\u003c\/li\u003e\n\u003cli\u003eAllows for safe shutdown if peripheral clock stops\u003c\/li\u003e\n\u003cli\u003eTwo-Speed Oscillator Start-up\u003c\/li\u003e\n\u003cli\u003eFull 5.5V operation (PIC18F2XK22\/4XK22)\u003c\/li\u003e\n\u003cli\u003eLow voltage option available for 1.8V-3.6V operation (PIC18LF2XK22\/4XK22)\u003c\/li\u003e\n\u003cli\u003eSelf-reprogrammable under software control\u003c\/li\u003e\n\u003cli\u003ePower-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)\u003c\/li\u003e\n\u003cli\u003eProgrammable Brown-out Reset (BOR)\u003c\/li\u003e\n\u003cli\u003eExtended Watchdog Timer (WDT) with on-chip oscillator and software enable\u003c\/li\u003e\n\u003cli\u003eProgrammable code protection\u003c\/li\u003e\n\u003cli\u003eIn-Circuit Serial Programming™ (ICSP™) via two pins\u003c\/li\u003e\n\u003cli\u003eIn-Circuit Debug via two pins\u003c\/li\u003e\n\u003cli\u003e10-bit resolution\u003c\/li\u003e\n\u003cli\u003e17 analog input channels (PIC18F\/LF2XK22)\u003c\/li\u003e\n\u003cli\u003e28 analog input channels (PIC18F\/LF4XK22)\u003c\/li\u003e\n\u003cli\u003eAuto acquisition capability\u003c\/li\u003e\n\u003cli\u003eConversion available during Sleep\u003c\/li\u003e\n\u003cli\u003eProgrammable High\/Low Voltage Detection (PLVD) module\u003c\/li\u003e\n\u003cli\u003eUp to 28 channels for button, sensor or slider input\u003c\/li\u003e\n\u003cli\u003eTwo rail-to-rail analog comparators\u003c\/li\u003e\n\u003cli\u003eComparator inputs and outputs externally accessible and configurable\u003c\/li\u003e\n\u003cli\u003eProgrammable On-chip Voltage Reference (CVREF) module (% of VDD)\u003c\/li\u003e\n\u003cli\u003eSelectable on-chip fixed voltage reference\u003c\/li\u003e\n\u003cli\u003eHigh current sink\/source 25 mA\/25 mA\u003c\/li\u003e\n\u003cli\u003eIndividually programmable weak pull-ups\u003c\/li\u003e\n\u003cli\u003eIndividually programmable interrupt-on-pin change\u003c\/li\u003e\n\u003cli\u003eThree external interrupt pins\u003c\/li\u003e\n\u003cli\u003eUp to four 16-bit timers\/counters with prescaler\u003c\/li\u003e\n\u003cli\u003eUp to three 8-bit timers\/counters\u003c\/li\u003e\n\u003cli\u003eDedicated, low-power Timer1 oscillator\u003c\/li\u003e\n\u003cli\u003eUp to two Capture\/Compare\/PWM (CCP) modules\u003c\/li\u003e\n\u003cli\u003eOne, two or four PWM outputs\u003c\/li\u003e\n\u003cli\u003eSelectable polarity\u003c\/li\u003e\n\u003cli\u003eProgrammable dead time\u003c\/li\u003e\n\u003cli\u003eAuto-shutdown and Auto-restart\u003c\/li\u003e\n\u003cli\u003ePWM output steering control\u003c\/li\u003e\n\u003cli\u003e3-wire SPI (supports all 4 SPI modes)\u003c\/li\u003e\n\u003cli\u003eI2C™ Master and Slave modes (Slave mode with address masking)\u003c\/li\u003e\n\u003cli\u003eSupports RS-232, RS-485 and LIN 2.0\u003c\/li\u003e\n\u003cli\u003eAuto-Baud Detect\u003c\/li\u003e\n\u003cli\u003eAuto Wake-up on Start bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Digilog Electronics","offers":[{"title":"Default Title","offer_id":43962238140481,"sku":"b128,NST","price":850.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2805\/1777\/files\/th_2_2e3b85a5-9e14-41df-9074-e48c3a41567f.jpg?v=1779558377","url":"https:\/\/stem.pk\/products\/pic18f46k22-i-pt-sop-44","provider":"stem.pk","version":"1.0","type":"link"}